NTP

NTP is a protocol to synchronise time and date information through a network. It is used to set the clock of your system automatically when your computer is connected to the internet.

NTP servers

To choose which servers to ask for time information to, use the networking.timeServers option. If you simply want to add a server to the default list, you can retrieve the default value of the option under the name options.networking.timeServers.default. Make sure to have options in the arguments at the beginning of the file:

/etc/nixos/configuration.nix

{ pkgs, lib, options, ...}
{
  networking.timeServers = options.networking.timeServers.default ++ [ "ntp.example.com" ]; 
}

Tip

In order to affect your system by your nix-language-specific changes you have to evaluate it, run (as root):

# nixos-rebuild switch

NTP daemon

Different NTP daemons are available on NixOS. The default one is systemd-timesyncd. To switch to another implementation:

• for ntpd, use services.ntp.enable = true;
• for openntpd, use services.openntpd.enable = true;
• for chrony, use services.chrony.enable = true;

Set NTP from DHCP servers

Most of the time the default NTP servers will be reachable. However, sometimes the NTP servers can be blocked by the firewall (for instance most universities block NTP for security reasons). This will be visible in the systemd-timesyncd.service:

$ sudo systemctl status systemd-timesyncd.service
● systemd-timesyncd.service - Network Time Synchronization
…
nov. 22 16:33:23 me systemd-timesyncd[2171]: Timed out waiting for reply from 94.198.159.11:123 (1.nixos.pool.ntp.org).
…

You can also test a specific server as follows:

$ nix-shell -p ntp
$ ntpdate -q 0.nixos.pool.ntp.org
22 Nov 17:06:57 ntpdate[4020886]: no server suitable for synchronization found

However, a replacement NTP is usually provided in that case via the DHCP protocol. You can see it for instance if you use Network Manager:

$ nmcli connection show 'name-of-the-current-connection' | grep ntp
DHCP4.OPTION[8]:                        ntp_servers = 192.168.x.y
DHCP4.OPTION[18]:                       requested_ntp_servers = 1
$ ntpdate -q 192.168.x.y
server 192.168.x.y, stratum 3, offset +2.493988, delay 0.02779
22 Nov 16:51:37 ntpdate[3923570]: step time server 192.168.128.1 offset +2.493988 sec

You might also be able to get the actual hostname of the DHCP (if it exists) using:

$ sudo nmap -sP 192.168.x.y

Then, you can of course manually add the DHCP server as explained above… but it's not practical when you often go to new places, or if the NTP server changes over time. For laptop it may not be a big issue (your internal clock will be used in that case until you reach a new network without firewalls) but for some devices like raspberry pi that can't store the time when device is turned off, or for servers that will always be behind the firewall, it can be interesting to automatically configure the NTP server using DHCP.

The procedure depends on how you configure internet:

1. By default: (if you have not installed network manager…) the module network-interfaces-scripted will be used… unfortunately as far as I know this script cannot deal with NTP.
2. networkd: If you use systemd-networkd, then it should automatically use the right NTP… However if you want the configuration to be automatic you want to use networking.useNetworkd = true; instead of systemd.network.enable (useNetworkd will automatically configure systemd.network to provide a good default experience as alone systemd.network does basically nothing). However, networking.useNetworkd is apparently experimental now (2022) according to its documentation, so use it at your own risks. As far as I understand you can also disable the default behavior using:

   systemd.network.config = {
     dhcpV4Config = { UseNTP = false; };
     dhcpV6Config = { UseNTP = false; };
   }
   

   but I have not tested it.

3. Network Manager If you use Network Manager, then Network Manager cannot (in 2022) automatically configure the NTP as-it… but you can use this trick to fake it, by automatically creating a new connection-specific NTP configuration every time the connection changes and restarting systemd-timesyncd.service:

   # In /etc/nixos/configuration.nix
   { pkgs, lib, options, ...}
   {
     ## To use, put this in your configuration, switch to it, and restart NM:
     ## $ sudo systemctl restart NetworkManager.service
     ## To check if it works, you can do `sudo systemctl status systemd-timesyncd.service`
     ## (it may take a bit of time to pick the right NTP as it may try the
     ## other NTP firsts)
     networking.networkmanager.dispatcherScripts = [
       {
         # https://wiki.archlinux.org/title/NetworkManager#Dynamically_set_NTP_servers_received_via_DHCP_with_systemd-timesyncd
         # You can debug with sudo journalctl -u NetworkManager-dispatcher -e
         # make sure to restart NM as described above
         source = pkgs.writeText "10-update-timesyncd" ''
           [ -z "$CONNECTION_UUID" ] && exit 0
           INTERFACE="$1"
           ACTION="$2"
           case $ACTION in
           up | dhcp4-change | dhcp6-change)
               systemctl restart systemd-timesyncd.service
               if [ -n "$DHCP4_NTP_SERVERS" ]; then
                 echo "Will add the ntp server $DHCP4_NTP_SERVERS"
               else
                 echo "No DHCP4 NTP available."
                 exit 0
               fi
               mkdir -p /etc/systemd/timesyncd.conf.d
               # <<-EOF must really use tabs to keep indentation correct… and tabs are often converted to space in wiki
               # so I don't want to risk strange issues with indentation
               echo "[Time]" > "/etc/systemd/timesyncd.conf.d/''${CONNECTION_UUID}.conf"
               echo "NTP=$DHCP4_NTP_SERVERS" >> "/etc/systemd/timesyncd.conf.d/''${CONNECTION_UUID}.conf"
               systemctl restart systemd-timesyncd.service
               ;;
           down)
               rm -f "/etc/systemd/timesyncd.conf.d/''${CONNECTION_UUID}.conf"
               systemctl restart systemd-timesyncd.service
               ;;
           esac
           echo 'Done!'
         '';
       }
     ];
   }
   

   To apply the change, switch to your new configuration and make sure to restart Network Manager:

   $ sudo systemctl restart NetworkManager.service
   

   Check if the NTP server is used (may need to wait a few minutes):

   $ sudo systemctl status systemd-timesyncd.service
   

   You might need to wait a one or two minutes as systemd-timesyncd may try to load other ntp servers, timeout, and then try the new NTP server.