Nixpkgs/Building RPM DEB with nixpkgs

This article or section needs expansion.

Reason: This article is a stub. (Discuss in Talk:Nixpkgs/Building RPM DEB with nixpkgs#)
Please consult the pedia article metapage for guidelines on contributing.

Please note that this page is under construction and the provided information is incomplete. Reach out to matthiasbeyer if this page was not updated in a long time.

How it works

To build deb/rpm packages with nix/nixpkgs, it is critical to understand the process. Hence a short intro:

To build a deb or rpm package with nixpkgs, the build process needs a disk image which it then uses to boot a virtual machine (as in Qemu). Inside this virtual machine, the deb/rpm package is compiled from a tarball and then packaged using the respective tools for deb/rpm packaging.

Luckily, all that requirements are shipped inside nixpkgs itself.

Preparation of the host machine

The host machine has to be prepared for the build process.

In the setting the author of this article used, the host machine was a CentOS 7 amd64 machine running in vmware. On the machine, the nix package manager was installed via curl https://nixos.org/nix/install | sh as suggested on https://nixos.org/nix/ > "Get Nix".

The configuration file /etc/nix/nix.conf was edited for the following contents:

sandbox = false
system-features = [ kvm nixos-test benchmark big-parallel ]

This step might not be necessary on a NixOS installation.

How to build a deb/rpm with nixpkgs

The author used a simple approach:

Clone the official nixpkgs repository into ~/nixpkgs
Add a file to the nixpkgs repository ./deb.nix with the following contents:

(In this scenario, ncurses was built for testing the whole approach)

let
  pkgs = (import ./default.nix {});
  vm    = pkgs.vmTools.diskImageFuns.centos7x86_64 {};
  args = {
    diskImage = vm;
    src       = pkgs.ncurses.src;
    name      = "ncurses-deb";
    buildInputs = [];
    meta.description = "No descr";
  };
in pkgs.releaseTools.debBuild args

and then this file was called: nix-build ./deb.nix.

This loads the relevant disk images from the channel mirror and spins up the Qemu VM to build the package. The deb file (in this case, as we're building a deb with the expression from above) is located in ./result/debs/ after a successful build.