Cheatsheet
A NixOS cheat sheet and comparison to Ubuntu
Ubuntu vs. NixOS provides a table mapping of common administrative tasks and their commands in Ubuntu to similar capabilities in NixOS.
Working with the nix store
Get the store path for a package
$ nix repl
nix-repl> :l <nixpkgs>
Added 7486 variables.
nix-repl> "${xorg.libXtst}"
"/nix/store/nlpnx21yjdjx2ii7ln4kcmbm0x1vy7w9-libXtst-1.2.3"
nix-repl> :lf ./configuration.nix # as flakes way for a local file
# load nixos configuration from a nix file
$ nix repl --file '<nixpkgs/nixos>' -I nixos-config=./configuration.nix
$ nix-build '<nixpkgs>' --no-build-output -A xorg.libXtst
/nix/store/nlpnx21yjdjx2ii7ln4kcmbm0x1vy7w9-libXtst-1.2.3
Adding files to the store
It is sometimes necessary to add files to the store manually. This is particularly the case with packages that cannot be downloaded automatically, for example, proprietary software packages. For most files, it is sufficient to run:
$ nix-store --add-fixed sha256 /path/to/file
Unfortunately, `nix-store` will try to load the entire file into memory, which will fail if the file size exceeds available memory. If we have root access, we can copy the file to the store ourselves:
$ sudo unshare -m bash # open a shell as root in a private mount namespace
$ largefile=/path/to/file
$ hash=$(nix-hash --type sha256 --flat --base32 $largefile) # sha256 hash of the file
$ storepath=$(nix-store --print-fixed-path sha256 $hash $(basename $largefile)) # destination path in the store
$ mount -o remount,rw /nix/store # remount the store in read/write mode (only for this session)
$ cp $largefile $storepath # copy the file
$ printf "$storepath\n\n0\n" | nix-store --register-validity --reregister # register the file in the Nix database
$ exit # exit to the original shell where /nix/store is still mounted read-only
To add a file with fixed name (when the input filename is not stable), or to add entire directories with filter, you can use builtins.path:
$ nix-instantiate --eval --read-write-mode -E 'builtins.path { path = ./myfile; name = "myname"; }'
Build nixos from nixpkgs repo
The following snippet will build the system from a git checkout:
$ nixos-rebuild -I nixpkgs=/path/to/nixpkgs switch
This method can be used when testing nixos services for a pull request to nixpkgs.
Building nixos from a git is an alternative to using nix channels and set up permanent following this blog article. It has a couple of advantages over nixpkgs as it allows back-porting of packages/changes to stable versions as well as applying customization.
Use the following command to build directly from a particular branch of a repository in GitHub:
$ nixos-rebuild -I nixpkgs=https://github.com/nixcloud/nixpkgs/archive/release-17.03.tar.gz switch
Evaluate a NixOS configuration without building
If you only want to evaluate `configuration.nix` without building (e.g. to syntax-check or see if you are using module options correctly), you can use:
$ nix-instantiate '<nixpkgs/nixos>' -A system
This creates the `.drv` file that `nixos-rebuild build` would build.
Manually switching a NixOS system to a certain version of system closure
(Or: What nixos-rebuild does under the hoods.)
Step 1: Do this for the equivalent of nixos-rebuild boot or nixos-rebuild switch, i.e. if you want the changes to persist after reboot:
If you have the store path, run this, replacing $systemClosure with store path to your system closure:
$ nix-env --profile /nix/var/nix/profiles/system --set $systemClosure
Or, if it was a previous generation, you can run this instead, replacing $generation with the desired generation number:
$ nix-env --profile /nix/var/nix/profiles/system --switch-generation $generation
Step 2: Do this for all changes:
Run this, replacing $action with the action (one of boot, switch, test):
$ /nix/var/nix/profiles/system/bin/switch-to-configuration $action
If you use a different profile name the procedure is similar, but use /nix/var/nix/profiles/system-profiles/$profileName instead of /nix/var/nix/profiles/system.
Building a service as a VM (for testing)
While nixos-rebuild build-vm allows to build a vm out of the current system configuration, there is a more light-weight alternative when only a single service needs to be tested.
Given the following configuration:
# vm.nix
{ lib, config, ... }:
{
services.tor.enable = true;
users.users.root.initialPassword = "root";
}
a vm can be build using the following command:
$ nixos-rebuild -I nixpkgs=/path/to/nixpkgs -I nixos-config=./vm.nix build-vm
where -I nixpkgs=/path/to/nixpkgs is optionally depending whether the vm should be build from git checkout or a channel.
On non-nixos (linux) systems the following command can be used instead:
$ nix-build '<nixpkgs/nixos>' -A vm -k -I nixos-config=./vm.nix
By default the resulting vm will require X11 to create a virtual display.
By specifying additional arguments via the environment variables QEMU_OPTSand QEMU_KERNEL_PARAMS it is possible to reuse the current running terminal as serial console for the vm:
$ export QEMU_OPTS="-nographic -serial mon:stdio" QEMU_KERNEL_PARAMS=console=ttyS0
$ /nix/store/lshw31yfbb6izs2s594jd89ma4wf8zw6-nixos-vm/bin/run-nixos-vm
To forward a port you can set export QEMU_NET_OPTS. In the following example port 2222 on the host is forwarded to port 22 in the vm:
$ export QEMU_NET_OPTS="hostfwd=tcp::2222-:22"
Don't forget that by default nixos comes with a firewall enabled:
{...}: {
networking.firewall.enable = false;
}
Reuse a package as a build environment
As packages already contains all build dependencies, they can be reused to a build environment quickly. In the following a setup for the cmake-based project [bcc](https://github.com/iovisor/bcc) is shown. After obtaining the source:
$ git clone https://github.com/iovisor/bcc.git
$ cd bcc
Add the following default.nix to the project:
with import <nixpkgs> {};
linuxPackages.bcc.overrideDerivation (old: {
# overrideDerivation allows it to specify additional dependencies
buildInputs = [ bashInteractive ninja ] ++ old.buildInputs;
})
To initiate the build environment run `nix-shell` in the project root directory
# this will download add development dependencies and set up the environment so build tools will find them.
$ nix-shell
The following is specific to bcc or cmake in general: (so you need to adapt the workflow depending on the project, you hack on)
$ mkdir build
$ cd build
# cmakeFlags is also defined in the bcc package. autotools based projects might defined $configureFlags
$ eval cmake $cmakeFlags ..
$ make
Evaluate packages for a different platform
Sometimes you want to check whether a change to a package (such as adding a new dependency) would evaluate even on a different type of system. For example, you may want to check on `x86_64-linux` whether a package evaluates for `x86_64-darwin` or `aarch64-linux`.
Use the `system` argument:
$ nix-instantiate --argstr system "x86_64-darwin" -A mypackage
Cross-compile packages
The following command will cross compile the tinc package for the aarch64 CPU architecture from a different architecture (e.g. x86_64).
$ nix-build '<nixpkgs>' --arg crossSystem '(import <nixpkgs> {}).lib.systems.examples.aarch64-multiplatform' -A tinc
You can add your own specifications, or look at existing ones, in nixpkgs/lib/systems/examples.nix.
Customizing Packages
Upgrading individual packages to a different channel
One can track multiple channels on NixOS simultaneously, and then declaratively change packages from the default channel to another one.
For example one can have both the unstable and stable channels on system root:
$ sudo nix-channel --list
nixos https://nixos.org/channels/nixos-17.03
nixos-unstable https://nixos.org/channels/nixos-unstable
and the following in `configuration.nix`:
nixpkgs.config = {
# Allow proprietary packages
allowUnfree = true;
# Create an alias for the unstable channel
packageOverrides = pkgs: {
unstable = import <nixos-unstable> { # pass the nixpkgs config to the unstable alias # to ensure `allowUnfree = true;` is propagated:
config = config.nixpkgs.config;
};
};
};
which allows you to switch particular packages to the unstable channel:
environment.systemPackages = with pkgs; [
ddate
devilspie2
evince
unstable.google-chrome
# ...
zsh
];
Building statically linked packages
$ nix-build -E 'with (import ./. {}); (curl.override { stdenv = makeStaticLibraries stdenv;}).out'
There is also an stdenv adapter that will build static binaries:
$ nix-build '<nixpkgs>' -A pkgsStatic.hello
Rebuild a package with debug symbols
$ nix-build -E 'with import <nixpkgs> {}; enableDebugging st'
$ file result/bin/st
result/bin/st: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /nix/store/f111ij1fc83965m48bf2zqgiaq88fqv5-glibc-2.25/lib/ld-linux-x86-64.so.2, for GNU/Linux 2.6.32, not stripped, with debug_info
Download a nix store path from the cache
If you want to the exact same nix store path on a different system, you can use the --realise or short -r parameter in the nix-store command:
$ nix-store -r /nix/store/0vg5bw04dn21czjcqcqczyjrhys5cv30-hello-2.10
$ find /nix/store/0vg5bw04dn21czjcqcqczyjrhys5cv30-hello-2.10
/nix/store/0vg5bw04dn21czjcqcqczyjrhys5cv30-hello-2.10
/nix/store/0vg5bw04dn21czjcqcqczyjrhys5cv30-hello-2.10/bin
/nix/store/0vg5bw04dn21czjcqcqczyjrhys5cv30-hello-2.10/bin/hello
/nix/store/0vg5bw04dn21czjcqcqczyjrhys5cv30-hello-2.10/share
/nix/store/0vg5bw04dn21czjcqcqczyjrhys5cv30-hello-2.10/share/locale
...
Install an arbitrary nix store path into a user profile
nix-env also accepts the full path to a program in the nix store:
$ nix-env -i /nix/store/yzz2gvpcyxg5i68zi11sznbsp1ypccz8-firefox-65.0
Check the syntax of a nix file
$ echo '{}: bar' > expression.nix
$ nix-instantiate --parse-only expression.nix
error: undefined variable 'bar' at /tmp/expression.nix:1:5
Using override with nix-build
using channels
nix-build -E 'with (import <nixpkgs>{}); polybar.override { i3Support = true; }'
using a local repo
nix-build -E 'with (import ./default.nix{}); polybar.override { i3Support = true; }'